X-Macro Magazine Adapter V2

10 ROUND MAG ADAPTERS MAKE SURE YOU ARE BUYING THE CORRECT ONE FOR YOUR MAG TUBE! (SEE IMAGES) IF YOU HAVE A 10 ROUND MAGAZINE WITH DIMPLES YOU MUST BUY THE 12 ROUND ADAPTER! 

If you have 10 round P365XL Magazines, they are the same tube length as standard 12 round magazines and use 12 round adapters. Using a 12 round adapter on a 10 round P365XL Magazine does NOT change the capacity. It will still only hold 10 rounds.

These V2 mag bases are designed to adapt your stock P365 10, XL & X pinned (dimpled) 10 round magazines or 12 round magazines to fit into the X Macro grip module (they will work in any smaller grip module as well, but will not blend to the bottom of the frame).

The V2 will also work with the XMacro Tacops, Sig Sauer Magwell and many other aftermarket magwells.

The mag bases now come in two length options. Low Profile for the minimalist amount of mag base below the grip module to reduce profile for CCW (Will be hidden inside a magwell) and Extended for extra weight and grip as it will extend below the magwell on most magwell equipped grip modules.

Please check the dimensions of the mag you have against the image here so verify you have a standard 10 Round Magazine (and not a larger "pinned" one). If you have a "pinned" (looks like two dimples pushed in from either side of the magazine tube) 10 round then you actually need the adapter for the 12 round magazine.

They are machined from aluminum and hollowed out to be lightweight if that's what you want OR you can add Tungsten weights into the cavities to make back the weight lost from the missing rounds. Adding weights reduces felt recoil and makes the mags drop faster and more reliably from the gun. (Weight kits sold separately).

These adapters will keep the same capacity as the original magazine. They simply replace the baseplate and use the same internals from the stock magazine. If you wish to lock the baseplate firmly in place (for repeated dropping such as with competition use) we recommend the locking plate - sold separately - available here.

Add functionality to earlier magazines and maintain "compliance" when used in grip modules that were designed for higher capacity magazines. Base plates can be used with the original spring plate or can be bolted through and into an internal locking plate to allow tactical reloads and normal range use (dropping on concrete/rocks may damage the mag base cosmetically and is not covered under warranty, but functionality is covered).

Made in the USA and anodized to be very robust these will put up with abuse and come with a Lifetime factory warranty against defects in design or manufacturing (does not cover cosmetic issues from use or dropping mags). 

Install Videos